manualshive.com logo in svg

Lake Shore 372, Руководство пользователя, Страница: 177 / 214

Поделиться
Скачать
Lake Shore 372 Скачать руководство пользователя страница 177

   

6.6.1   Interface Commands       

165

 

                                                        

   

|

   

www.lakeshore.com

INNAME

Sensor Input Name Command

Input

INNAME <input/channel>,<name>[term]

Format

n,s[15]
<input/channel>

Specifies which input or channel to configure: A (control input), 

1 to 16 (measurement input)

<name>

Specifies the name to associate with the sensor input. 

Example

INNAME 1,“Sample Space”[term]

 — The string “Sample Space” will appear on the 

front panel display, when possible, to identify the sensor information being displayed.

Remarks

Be sure to use quotes when sending strings, otherwise characters such as spaces and 
other non alpha-numeric characters will be interpreted as a delimiter, and the full 
string will not be accepted. It is not recommended to use commas or semi-colons in 
sensor input names as these characters are used as delimiters for query responses.

INNAME?

Sensor Input Name Query

Input

INNAME? <input>[term]

Format

a
<input>

Specifies input to query: A to D (D1 to D5 for 3062 option).

Returned

<name>[term]

Format

s[15] (refer to command for description)

INSET

Input Channel Parameter Command

Input

INSET <input/channel>,<disabled/enabled>,<dwell>,<pause>, 
<curve number>,<tempco>[term]

Format

nn,n,nnn,nnn,nn,n
<input/channel>

Specifies which input or channel to configure: A (control 
input), 1 to 16 (measurement input), 0 = all channels (mea-
surement input).

<disabled/enabled>

Specifies whether the input/channel is disabled or enabled: 
0 = disabled, 1 = enabled.

<dwell>

Specifies a value for the autoscanning dwell time: 
1 to 200 s. Not applicable for <input/channel> = A (control 
input).

<pause>

Specifies a value for the change pause time: 3 to 200 s.

<curve number>

Specifies which curve the channel uses: 0 = no curve, 1 to 59 

= standard/user curves.

<tempco>

Sets the temperature coefficient that will be used for 

temperature control if no curve is selected: 1 = negative, 
2 = positive.

Example

INSET 5,1,10,3,0,2[term]

 — Enables channel 5 with 10 s autoscan dwell, 3 s pause 

time, and no curve with a positive temperature coefficient.

Remarks

At least one measurement input channel must be enabled. If all are configured to dis-
abled, channel 1 will change to enabled.

INSET?

Input Channel Parameter Query

Input

INSET? <input/channel>[term]

Format

nn
<input/channel>

Specifies which input or channel to query: A (control input), 

1 to 16 (measurement input).

Returned

<off/on>,<dwell>,<pause>,<curve number>,<tempco>[term]

Format

n,nnn,nnn,nn,n (refer to command for description)

Содержание 372























































































































































































































Отзывы:

Нет отзывов