Lake Shore 372 Скачать руководство пользователя страница 154 | Manualshive

Страница: 154 / 214

Lake Shore 372 Скачать руководство пользователя страница 154

142

c

HAPTER

6:

Computer Interface Operation

Model 372 AC Resistance Bridge and Temperature Controller

Utilities Page: provides links to launch the embedded curve handler application, the
embedded Ethernet firmware updater, and the instrument configurator backup
utilities

Security Settings: provides a means of changing the website security settings by
allowing the user to enter a new username and password for the website, or to
remove password protection from the website. The username and password parame-
ters are available for viewing and editing from the front panel under the Modify IP
Config submenu of the Interface menu.

Password protection only protects access to the embedded web pages and does not pro-
vide any kind of security for TCP Socket access (section 6.4.3).

The website username and password are available from the front panel menu, and there-
fore can easily be obtained by anyone with access to the Model 372 front panel.

Contact Us: provides information regarding how to contact representatives of
Lake Shore Cryotronics, Inc.

6.5 Utilities

The utilities embedded on the Model 372 are written using the Java™ programming
language. This theoretically allows the applications to run properly on many different
platforms (Windows®, Mac®, Linux™, etc.), although the applications are only sup-
ported on Microsoft Windows® XP or Windows® 7 and Vista®, and have been designed
to work with the Java™ Runtime Environment (JRE) version 1.6. To download Java™
JRE, please visit www.java.com.

Please note that without the proper JRE installed the utilities will not run properly.

The applications are launched from the Utilities web page using Java™ Web Start
technology. This allows the application to run outside of the web browser in a stand-
alone window. The application can only be launched using the link in the embedded
web page, and cannot be permanently installed. When launching the application,
multiple security warning messages may appear. These messages are meant to pro-
tect from malicious software that can cause harm to, or compromise the security of,
your computer or your data. The applications have been thoroughly tested and are
considered by Lake Shore to be safe.

All software is imperfect and any software may be used by a malicious user for malicious
purposes.

FIGURE 6-7

Utilities page

«
...
152
153
154
155
156
...
»

Содержание 372























































































































































































































Отзывы:

Нет отзывов