La Cornue Centenaire, Инструкция по эксплуатации

Страница: 49 / 266

Double-circuit operating:
to enlarge the double circuit heating area, simply turn
the corresponding knob to the right, beyond 6, to
8 8
. You will hear a click from the
micro-switch, which lights the peripheral element. The power of the double burner can
be set by returning to any number between 6 and 1.
It is impossible to only ignite the exterior heating area.
The vitroceramic plates have 3 indicator lights: one at the bottom left - these come on
when a hob control is turned on and two indicator lights of residual heat (one for each
cooking areas) in the bottom right.
As long as the symbol of residual heat is on, do not touch the cooking areas and
do not place anything sensitive to heat on the ceramic glass.
The cooking surface is resistant to thermal shocks and both heat and cold. Nevertheless,
any periodic mechanical shock, due, for example, to dropping a saltshaker, can have a more
damaging effect.
Please note: if the surface is cracked/fractured, immediately disconnect the appliance or the
relevant part of the supply.
It is strongly recommended to keep anything likely to melt, such as tin foil and plastic items,
at a distance from the hob. The surface of the vitro-ceramic element may be hot, even if the indi-
cator light is not turned on.
This surface must not be used as a work surface area for resting pots and pans.
Any cooking utensil, with a base at least as large as the cooking area, can be used. If the base
is slightly larger, use of energy is optimal. The bottoms of pots and pans should be slightly
concave, as they dilate when heated and sit better on the hotplate, which enhances energy dis-
tribution.
Induction hob
Your
induction hob uses
the magnetic properties of most pans used on ordinary hobs to
create rapid heat.
49
E
NGLISH
0
3
1
2
4
5
6
0
3
1
2
4
5
6
single burner
double burner