Kyoeisha Baroness LM531, Руководство по обслуживанию

Страница: 142 / 161

Move the cam in the direction of the arrow,
and remove the pivot pin along the housing
hole.
Important
There are two pivot pin receivers inside the
housing.
The position varies between the brake
calipers CW and CCW, so check the position
before moving the pin.
1
3
2
u5l8nd-011
Removal of Brake Caliper_011
1 Cam
2 Pivot pin
3 Housing hole
Inspect the wear of the convex portion of the
cam.
If it is worn excessively, replace the cam.
1
u5l8nd-012
Removal of Brake Caliper_012
1 Convex portion of cam
13.
14.
Installation of Brake Caliper
For installing the brake caliper, reverse the
removing procedure.
Apply brake grease (dry lubricant) lightly to
the convex portions of the pivot pin and cam.
3
2
1
b8kbof-001
Installation of Brake Caliper_001
1 Pivot pin
2 Cam
3 Convex portion of cam
Insert the cam into the housing, position the
installation hole of cam with the hole of
housing and insert the pivot pin into the hole
of the housing.
2
1
3
b8kbof-002
Installation of Brake Caliper_002
1 Cam
2 Housing
3 Pivot pin
1.
2.
LM531
Main Vehicle
Page 6-10
Mechanical brake manual