Kyoeisha Baroness LM531, Руководство по обслуживанию

Страница: 87 / 161

Use extra care when handling the battery,
and if any problems are found, replace the
battery with a new one.
Carry or store the battery with care so that it
does not fall or become damaged.
Danger Danger
If the battery has an unusual odor, if the
electrolyte level goes down unusually fast, or
if the electrolyte leaks, do not continue to use
the battery.
Failure to observe these precautions could
cause a fire or explosion.
When connecting a machine-side cable
terminal to a battery terminal, ensure that the
nut is firmly tightened.
A loose nut could cause a fire or an explosion.
Warning
When connecting the machine-side cable
terminals to the battery, ensure that they are
correctly connected to the positive and
negative terminals.
Secure the battery firmly with the mounting
bracket.
Failure to do so could cause damage to the
battery, leakage of the electrolyte, fire or
explosion.
Do not modify the battery terminals.
Ensure that the vent plug or vent hole on the
side of the battery is not covered by the
connection cables, etc.
Do not connect any electrical devices directly
to the battery.
3.
Caution
If deformation of the exterior of the battery is
observed, do not continue to use it.
Doing so could result in damage to the battery
or electrolyte leakage.
Do not use organic solvents such as benzene,
thinner, gasoline or other organic solvents,
detergents, or chemical dusters.
Doing so could result in damage to the battery
case and electrolyte leakage.
Select a battery that has the same terminal
positions (the positions of the positive and
negative terminals) as the original one.
Installing a battery that has different terminal
positions could cause damage to the cables.
Do not allow the battery to come in contact
with vinyl chloride containing plasticizer, etc.
When handling the battery, keep it in a
horizontal position and install it on the
mounting so that it is horizontal.
If the battery has terminal covers or heat
shield plates attached, re-install them in their
original positions after replacing the battery.
When mounting the battery on the machine,
never hold the battery terminals.
Doing so could cause the terminals to deform,
resulting in poor connections or electrolyte
leaks from around the terminals.
Replace the battery with one that has the
same size.
Inspection of Battery
Always stop the engine and remove the key
before doing an inspection.
Battery inspection items are described below.
Inspecting the exterior
Visually inspect the exterior of the battery,
and check that there are no cracks, splits,
missing sections, or abnormal deformation
in the battery case, and that there is no
electrolyte leaking.
If abnormalities are found, immediately
replace the battery. 1.
Electrical System
LM531
Electrical System
Page 5-3
General Inspection and Repair