Kyoeisha Baroness LM531, Руководство по обслуживанию

Страница: 47 / 161

A
B
w7s31b-011
Bite Type Tube Fitting_004
A Correct installation orientation
B Incorrect installation orientation
Fix the temporary tightening tool onto the
vise and apply hydraulic oil to the threads,
tapered part, and sleeve.
w7s31b-005
Bite Type Tube Fitting_005
Put the tube end onto the hole bottom of
the temporary tightening tool and tighten
the nut.
The point where the tube can no longer be
rotated by hand is called the "zero point."
w7s31b-006
Bite Type Tube Fitting_006
4.
5.
Matchmarking the zero point and further
tightening the nut will cause the sleeve to
bite into the tube.
At this time, check the shape of the sleeve
using the following illustration as a guide,
and adjust the nut by tightening it.
Sleeve A: short with no slit - tighten 3/4 turn
Sleeve B: long with slit - tighten 1 + 1/4 turn
2 1
w7s31b-012
Bite Type Tube Fitting_007
1 Sleeve A
2 Sleeve B
w7s31b-007
Bite Type Tube Fitting_008
6.
Hydraulic System
LM531
Hydraulic System
Page 4-7
General Inspection and Repair