Kyoeisha Baroness LM531, Руководство по обслуживанию

Страница: 125 / 161

Solenoid Specifications
Voltage Resistance
Holding
Current
DC 12 V 9.8 Ω 1.22 A
Starter Relay
The starter relay is located near the terminal
relay under the seat, and controls the starting
of the starter motor by receiving a signal from
the safety switch.
Wiring from the safety switch is connected to
the alternator L-terminal (grounded at startup)
via the relay.
The starter motor can be started only when the
safety switch and the alternator are working
properly.
1
ipzeta-008
Starter Relay_001
1 Starter relay
Double Multi-Valve
The double multi-valve is located next to the
driver's seat.
It is composed of the manual valve interlocked
with the mower unit up/down lever and the
solenoid valve (electromagnetic valve)
interlocked with the reel rotation switch.
The solenoid valve switches the hydraulic route
in the reel rotation valve and controls "stop,"
"normal rotation," and "reverse rotation" of the
gear motors of the mower units.
1
p64wc8-001
Double Multi-Valve_001
1 Solenoid valve
Inspection of Solenoid
Disconnect the solenoid connectors.
The normal resistance between the
connector terminals of the solenoid is about
3.2 Ω.
Solenoid Specifications
Voltage Resistance
Holding
Current
DC 12 V 3.2 Ω 3.75 A
1.
2.
Electrical System
LM531
Electrical System
Page 5-41
Electrical components