Kval 990FX, Руководство по эксплуатации и обслуживанию

Страница: 41 / 172

Tour of the Machine
2-11
KVAL Operation/Service Manual
Tour of the Machine
This section identifies assemblies and parts on the machine.
About the In-Feed Section
At the In-Feed, the door is fed in the machine. Sensors detect the door and start the auto feed and
clamping of the door.
• Door is input from previous machine
• Includes automatic door width adjustment
• Door is feed through machine for processing
• The door is automatically positioned while the operator loads and clamps the jamb.
FIGURE 2-3.
Key Assemblies on the In-Feed Section
Lock Back Section
Faceplate routing
and boring for lock
and bolt
In-Feed System
Door is delivered from
previous machine and fed
into 990-FX for process-
ing.
Hydraulic Tanks
for Six Shooters
Supplies hydraulic
pressure to operate
Six Shooter.
Six Shooters
Auto drop down to
apply hinges and
secure them with
screws delivered
from Hopper
Six Shooter Nodes
Wiring for PLC con-
trol. Includes output
and Input signals One
node per Six Shooter
Frame Node
Localized
Electrical Box
Out of Pocket Sensor
A through beam that
senses if the Router car-
riage is out of the pocket
In Pocket Sensor:
A through beam that
senses if the Router car-
riage is in the pocket