Kval 990FX, Руководство по эксплуатации и обслуживанию

Страница: 126 / 172

Replacing Tooling in the Back Section
KVAL 990-FX Operation/Service Manual
4-36
Option SB (CNC Back Section)
If working on an Option SB (CNC Back Section), the Lock Plate can be extended for easy
access.The Lock access button make it easy to change tools on the lock section head. The buttons
are located under the
Manual
screen. Use the two buttons in tandem
Lock Access Button
with
Access Tools (OFF):
The
Lock Plate
will move to a position
for easy access.
Lock Access Button
with
Access Tools (ON:
, Moves the
Lock Plate
out further if more
room is needed to access tooling.
Changing the Bore Drill
Ball Catch Drills
1.
Remove Dust Collection Guard
2.
Use the shaft wrench and collet
wrench to remove the bit on the
pre-drill or router assemblies. See
photo.
When loosening the collet, it may
tighten up, crack again and con-
tinue.
3.
Inspect and clean collet assembly.
4.
Insert the new bit into the assem-
bly.
Collet Wrench
(PN: 15-00-ER32)
Shaft Wrench (1-5/8 '')
(PN: WRENCH026)