Kval 990FX, Руководство по эксплуатации и обслуживанию

Страница: 32 / 172

About the Machine Line
KVAL Operation/Service Manual
2-2
About the Machine Line
Below is summary of the operation of a door that is processed by a 990 system.
The 990-FX:
• Cut a hinge pocket on a door and jamb for up
to three hinges (Head Assembly)
• Drill pilot holes for the hinge screws (Head
Assembly)
• Choose different screws by way of the Hop-
pers.
• Apply up to four hinges.(Six Shooter)
• Attach the hinges with screws (Six Shooter)
• Cut a lock and lock plate (Back Section)
• Is Controlled by a Central Operators Station
Note: Hopper Options include linear on the floor
for quick operator access, standard on
machine, or rotatory configuration.
The ON-3:
• Automatically lifts a door from a stack in the
staging area
• The door is placed onto the powered roller
• )The door is fed into the 990-FX automatically
or with a call door function.
• After the door is fed into the 990-FX the action
is repeated
• For a detailed description of the 700-C, see
the ON-3 Operation/Service Manual
The 700 C:
• IA strike jamb and Header are placed into the
machine.
• A processed door is fed in from the 990-FX
• The door with the hinge jamb is gently lowered
into place.
• The door, header and strike jambs are clamped
by way to a foot pedal
• The foot pedal activates programed staple pat-
terns to attach the jambs to the header.
• The door is fed out for packaging for packaging
• For a detailed description of the 700-C, see the
700-C Reference Manual
Door Path