Installation of the Digital Video Recorder (DVR)
Digital Eyewitness
®
HD
In-Car Video System
6–6
Manual Part Number:
006-1219-00 Rev. 0
6. Connect the wireless file transfer antenna cable to one of the three available connections
on the rear of the DVR. Make these connections starting with the connection farthest to
the left.
Figure 6-8.
Wireless File Transfer Antenna Connections
7. Connect the Mini-OTP cable to the rear of the DVR. This connection has two screws that
are used to secure the cable to the DVR that the installer must tighten.
Figure 6-9.
Mini-OTP Cable Connections
8. Connect the TMC cable (or MDC cable if equipped) to the rear of the DVR. This
connection has two screws that are used to secure the cable to the DVR that the installer
must tighten.
Figure 6-10.
Tablet Monitor Controller (TMC) Connection
9. If equipped with MDC control, connect the CAT5 crossover cable to the LAN connector on
the back of the DVR.
Figure 6-11.
MDC Control Connection
Wireless File
Transfer Antenna
Connections
Mini-OTP
Connection
Tablet Monitor
Controller (TMC)
Connection
(or MDC
Connection, if
equipped)
MDC Control
Connection
