Installing the Camera and In-Car Microphone (ICM)
Manual Part Number:
006-1219-00 Rev. 0
3–1
Digital Eyewitness
®
HD
In-Car Video System
Chapter 3
Installing the Cameras and In-Car Microphone (ICM)
General Description
The information in this chapter applies to the following Kustom Signals, Inc. components:
HD camera (Part # 200-3048-00)
HD camera cable (Part # 155-3951-25)
Combination mount (camera and Expanse audio transmitter base) (Part # 050-0695-04)
Windshield mount (Part # 050-0615-00)
Each of the above mounts is used in conjunction with the HD camera and HD camera cable.
Installing an HD Camera with Standard Combination
Camera/Expanse Audio Transmitter Base Mount
(Part # 050-0695-04)
In the standard configuration, the primary HD camera on the Eyewitness
®
HD system will be
delivered preassembled on the standard combination mount, along with the Expanse audio
transmitter base.
The technician will need the following items to install the camera:
Camera/audio transmitter base/combo mount assembly
Supplied screws
Phillips head screwdriver
HD camera cable
1. Loosen the brace and slide it rearward on the bracket so that it is approximately ¼ to
½-inch from the front edge of the bracket and then secure it. This is done to keep it out of
the way until the final position of the combo mount is determined.
Figure 3-1.
Brace (Top View)
