Kustom Signals Digital Eyewitness HD, Руководство по установке

Страница: 17 / 70

Installing the Tablet Monitor Controller (TMC)
Manual Part Number:
006-1219-00 Rev. 0
2–1 Digital Eyewitness ® HD
In-Car Video System
Chapter 2
Installing the Tablet Monitor Controller (TMC)
General Description
The Digital Eyewitness ® HD in-car video system provides two monitor options:

Tablet Monitor Controller (Part # 200-2273-00)

Ferrite Clamp (Part # 013-0020-00)

MDC Controller (Part # 200-3054-00)

MDC Controller Cable (Part # 155-4002-22)
Preparing the Tablet Monitor Controller (TMC) for the Ball and
Socket Mount Installation
The installer has some flexibility when installing the Eyewitness ® HD system controller,
depending on the type of vehicle and the equipment in the vehicle.
IMPORTANT
Do not remove the protective film from the display until it is time
to hand the vehicle back to the customer. This will help protect
the display during installation.
Figure 2-1. Tablet Monitor Controller
The following items are needed to facilitate the installation:

Tablet Monitor Controller (TMC)

Mounting hardware

Cable

Loctite
®
Thread Locker Blue 242
®

Phillips head screwdriver

Pliers

22mm wrench