Kuka KR 30 HA Скачать руководство пользователя страница 109

Страница: 109 / 122

Consumables, safety data sheets (continued)

109 of 122

MA KR 30, 60 HA, KR C4 04.11.02 en

13 Disposal information

This product must be disposed of in accordance with all pertinent regulations governing the disposal of

waste and used lubricants.

Waste code:

Recommended means of disposal:

Unused product:

54 202

SAV

Used/contaminated product:

54 202

SAV

Packaging:

54 202

SAV, SAD

Container reconditioning

14 Transport regulations

This product is NOT classified as a dangerous good for the purpose of transportation according to the

German Law concerning the Conveyance of Dangerous Goods.

15 Regulations
EC regulations:

EC Safety Data Sheet Directive 91/155/EEC

EC Directive on Dangerous Preparations 88/379/EEC

EC Framework Directive on Waste 91/156/EEC

EC Directive on Hazardous Waste 91/689/EEC

National regulations (Germany):

Law concerning the Conveyance of Dangerous Goods

Water Resources Law (WHG)

Chemicals Law (ChemG)

Dangerous Substances Order (GefStoffV)

Law concerning Life--cycle Management and Waste (KrW--AbfG)

Federal Immission Control Act (BImschG)

Technical Guideline on Air (TA--Luft)

16 Other information

All information is based on the current state of our knowledge. It is intended only to describe our product

with regard to the safety data. It is not intended to provide assurance of particular properties.
The product may only be used for the scope of work specified above; any other use requires prior

consultation with KUKA. Using the product for any purpose other than for its designated use could lead to

risks which are not described in this document.
Further information on the use of the product may be found in the relevant technical specifications.

Содержание KR 30 HA



























































































































Результаты поиска

Содержание KR 30 HA

Отзывы:

Похожие инструкции для KR 30 HA

Бренды по названию

Популярные бренды

Kuka KR 30 HA, Руководство по сборке

Результаты поиска

Содержание KR 30 HA

Отзывы:

Похожие инструкции для KR 30 HA

Бренды по названию

Популярные бренды