Kuka KR 30 HA, Руководство по сборке

Страница: 45 / 122

5 Safety (continued)
45 of 122 MA KR 30, 60 HA, KR C4 04.11.02 en
Misuse
Any use or application deviating from the intended use is deemed to be impermissible mis-
use.
This includes e.g.:
G
Transportation of persons and animals
G
Use as a climbing aid
G
Operation outside the permissible operating parameters
G
Use in potentially explosive environments
G
Operation without additional safeguards
G
Outdoor operation
G
Underground operation
5.2.3 EC declaration of conformity and declaration of incorporation
This industrial robot constitutes partly completed machinery as defined by the EC Machinery
Directive. The industrial robot may only be put into operation if the following preconditions
are met:
G
The industrial robot is integrated into a complete system.
Or: The industrial robot, together with other machinery, constitutes a complete system.
Or: All safety functions and safeguards required for operation in the complete machine
as defined by the EC Machinery Directive have been added to the industrial robot.
G
The complete system complies with the EC Machinery Directive. This has been con-
firmed by means of an assessment of conformity.
Declaration of conformity
The system integrator must issue a declaration of conformity for the complete system in ac-
cordance with the Machinery Directive. The declaration of conformity forms the basis for the
CE mark for the system. The industrial robot must be operated in accordance with the appli-
cable national laws, regulations and standards.
The robot controller is CE certified under the EMC Directive and the Low Voltage Directive.
Declaration of incorporation
The industrial robot as partly completed machinery is supplied with a declaration of
incorporation in accordance with Annex II B of the EC Machinery Directive 2006/42/EC. The
assembly instructions and a list of essential requirements complied with in accordance with
Annex I are integral parts of this declaration of incorporation.
The declaration of incorporation declares that the start--up of the partly completed machinery
remains impermissible until the partly completed machinery has been incorporated into ma-
chinery, or has been assembled with other parts to form machinery, and this machinery com-
plies with the terms of the EC Machinery Directive, and the EC declaration of conformity is
present in accordance with Annex II A.
The declaration of incorporation, together with its annexes, remains with the system integra-
tor as an integral part of the technical documentation of the complete machinery.