KUHN PRIMOR, Инструкция по эксплуатации

Страница: 33 / 54

33
CONNECTIONS
Hydraulic
(Machines not equipped with an auxiliary unit)
The machine requires a double-acting hydraulic distributor with an independent lift function. The
machine’s hydraulic circuit operates at a maximum pressure of 180 bar.
The pressure hose is equipped with a screw-in valve.
The return hose is equipped with a female push-pull coupler ( ISO 7241).
Connect the distributor supply hoses to the tractor. The pressure hose (P) is identified by a white
arrow on a red background, with the arrow pointing away from the tractor towards the distributor. The
return hose (T) is identified by a white arrow on a blue background, with the arrow pointing away from
the distributor towards the tractor.
- The hydraulic connection to the tractor may be made in one of three ways:
1 - Single-acting distributor pressure and direct return to tank (certain models of John Deere
tractor require a return to the header).
2 - Double-acting distributor pressure and return to second orifice of the same distributor (beware
of direction of oil flow).
3 - Pressure on line to be followed from tractor distributor and return to tank.
- Plug in the hoses. Make sure that the hoses cannot catch while in operation.
- If the machine distributor is connected to the original tractor distributor, activate the relevant handle
on the tractor distributor to pressurise the hydraulic circuit (beware of direction of oil flow).
Electrical Working voltage: 12 Volts.
Keep all lighting clean and in good condition. Repair any damaged or
malfunctioning lights immediately.
Before taking out onto public roads, check that all lighting is in good working
order.
- Plug the lighting equipment into the standardised 7-pin socket at the rear of the tractor.