KUHN PRIMOR, Инструкция по эксплуатации

Страница: 23 / 54

23
Adjusting the speed of belt chain conveyor
Switch situated at the bottom right-hand side of the control box.
Warning !It is absolutely essential to switch on the indicating lamps in
order to power the electrical circuit which regulates the belt chain
conveyor.
Positioning the switch to the left increases the speed of the belt chain
conveyor.
Positioning the switch to the right decreases the speed of the belt chain
conveyor.
The speed of the belt chain conveyor is graduated from 0 to 10 in
increasing speed. This is illustrated on the front part of the machine.
Swivel chute
Push the switch up to rotate the chute to the right.
Push the switch down to rotate the chute to the left.
Raising and lowering the swivel chute cap
Push the switch to the left to raise the cap.
Push the switch to the right to lower the cap.