KUHN PRIMOR, Инструкция по эксплуатации

Страница: 48 / 54

48
STORAGE:
- If the machine is not to be used for a long period, prepare it for storage.
- Clean the hopper (inside, outside and below), the chute, the arm with a jet of water. Remove all
accumulating product. You may repaint all surfaces that may rust. Lubricate the bottom of the belt
chain.
When cleaning using pressure, it is necessary to pay attention to sensitive zones (axle points,
electrical connections ...).
- Put the axle pins back to preserve them from humidity and dust.
- Grease drive chain.
- Clean all the lubricating points and joints and lubricate again.
- As far as possible, garage your machine under a shelter, on blocks, to isolate it from humidity from
ground.
- Check the tyre pressure and the tightening of the gudgeons.