KUHN PRIMOR, Инструкция по эксплуатации

Страница: 6 / 54

6
GENERAL POINTS
1. In addition to the instructions contained in this manual, comply with safety and accident
prevention legislation.
2. Warnings affixed to the machine provide indications on safety measures to be applied and help
to avoid accidents.
3. When driving on public roads, follow the Highway Code in your country.
4. Before starting work, the user must familiarise himself with the machine’s operating controls
and their respective functions. Once work has begun, it will be too late.
5. The user must avoid wearing loose clothing which may get caught up in a moving part.
6. The use of a tractor with a safety cab is recommended.
7. Before switching on the machine and starting work, check around the machine (beware of
children!). Make sure that you have sufficient visibility! Keep people and animals away from the
danger area of the machine (risk of projection!).The machine must be used by one person only.
8. It is strictly prohibited to use the machine to carry persons or animals whilst in operation or
transit.
9. The machine must only be hitched to the tractor at the points provided in accordance with the
safety standards in force.
10. When hitching and unhitching the machine, put the stand or stands in the correct position and the
loading device in the inoperative position (arm lowered, grab retracted).
11. Take great care when hitching the machine to the tractor and when uncoupling it.
12. Before hitching the machine, make sure that there is sufficient ballast on the front axle of the
tractor. Ballast should be added to the special supports according to the tractor manufacturer’s
instructions. The front axle load must be not be less than 20% of the unladen tractor weight.
13. Do not exceed the maximum axle weight and the gross vehicle weight rating.
14. Do not exceed the maximum vehicle gauge allowed on public roads.
15. Before entering public roads, make sure that all guards and signalling devices (lights, reflectors,
etc.) required by law are fitted and working properly.
16. All remote controls (cords, cables, linkages, etc.) must be positioned such that they cannot
accidentally set off an operation which may lead to a risk of accident or damage.
17. Before entering public roads, put the machine into the transport position in accordance with the
manufacturer’s instructions (arm and grab retracted, body in the transport position, delivery
chute and cover folded back).