KUHN PRIMOR, Инструкция по эксплуатации

Страница: 40 / 54

40
SAFETY
Before carrying out any maintenance, servicing or repair work or when
investigating the cause of a failure or malfunction, switch off the engine, remove
the ignition key and wait for all moving parts to come to a complete standstill.
Before proceeding with any maintenance work on a machine in the raised
position, prop up the machine with an appropriate support.
When replacing a working part, wear protective gloves and only use appropriate
tools.
To avoid environmental contamination, it is forbidden to throw away or dump
any type of oil, grease or filter. Hand them over to specialist recovery firms.
Before carrying out any operations on the electrical circuit, disconnect the
power source (tractor battery or charging circuit).
Any protective devices liable to wear should be checked regularly. Replace
them immediately if they are damaged.
Spare parts must comply with the standards and specifications laid down by
the manufacturer. Only use KUHN spare parts.