KUHN PRIMOR, Инструкция по эксплуатации

Страница: 39 / 54

39
OPTIONS
The optional equipment is compatible with the machines as shown in the table below:
OPTIONS Mounted PRIMOR
Semi-mounted
PRIMOR
PRIMOR with
pivoting chute
Electrical control X X X
Wide angle PTO shaft
X X
Rectangular bales kit
X X X
Chute type of standard PRIMOR on straw blower /
chopper PRIMOR PH
X X
Sealed floor X X
The option electrical control is only fitted at factory.
Before fitting optional equipment to the machine, respect these few rules:
- check that the equipment received actually corresponds to the equipment ordered.
- check the contents of the parcel with the aid of the list given in the manual.
- read carefully the assembly and usage manual for the equipment.
Beware!
WHEN CLEARING A BLOCKAGE OR REPLACING A WORKING PART, WEAR
PROTECTIVE GLOVES AND ONLY USE APPROPRIATE TOOLS.
To fit the options, you will need to use a variety of handling equipment and tools.
Refer to the safety instructions for such equipment before use.
The machine must be unhitched from the tractor before assembling an option.
Before assembling an optional device with the machine or one of the machine’s
loading components in the raised position, prop up the machine or the component
with an appropriate support.
If lifting gear (block and tackle, elevator, etc.) is used to handle the machine, only
use the specially provided lifting hooks shown by a pictogram.