KUHN PRIMOR, Инструкция по эксплуатации

Страница: 35 / 54

35
NO-LOAD TESTS
Do not stand in the working area of the machine.
Before starting up, the user must familiarise himself with the machine’s
operating controls and their respective functions. Once work has begun, it
will be too late.
Before starting up the machine, check around the machine (beware of
children!). Make sure that you have sufficient visibility.
Keep people and animals away from the danger area of the machine.
In the case of a “free wheel” PTO shaft, the fan may continue to run for around
two minutes after the PTO has come to a complete standstill.
- Test each control in both directions: beater bars, turbine, chute, axle und rear lifting door.
- Check the hydraulic circuit for leaks.
- Test the lighting and signalling system (side lights, brake lights and turn-signal indicators).
UNHITCHING
- Before unhitching the machine, switch off the tractor engine and remove the key from the ignition.
- Lay the machine on the ground so that it is stable.
- Before unhitching the machine, bring the grab inside the body and lower the arm completely (ram
rods fully retracted).
- Uncouple the hydraulic pressure and return hoses and the electrical connections.
- Apply the machine’s parking brake.
- Remove the hitch safety cable.
- Unhitch the machine.