Use on the land
107
I
NDICATION
Most types of fertiliser attract water and can thereby form large
chunks. These chunks can block the spreader or distort the spreading
pattern.
•
When working under moist weather conditions, use a hopper cover
that closes well.
•
Do not spread without a hopper cover under moist conditions.
•
Never leave the fertiliser for a long period of time in the spreader.
Chunks can also be formed through moisture in the air.
•
Always clean the spreader well after use, including the dosing
openings and the spreading spout.
I
NDICATION
Take note of the exact driving distance and make sure there are
tramlines.
•
If you want to change the application rate or switch to a different
fertiliser type (with similar working width and driving speed) you
only have to adjust the setting of the regulating rod.
•
Always check the set dosing setting with a calibration test
as described in paragraph »Calibration test« on page 93.
Adjusting the machine
Before you can make the first pass, you must make adjustments in the
field to:
Spreading height
The following is important to ensure that the spreader works properly
•
set it to the correct height from the ground or above the crop and
•
by levelling it with the lift rod adjustment and top link.
Use the power lift to lift the machine to the correct height.
Measured
from the centre of the spreading spout the distance to the
ground or the crop must be 29 1/2”.
Set the spreader horizontally with the lift rod adjustment and the
top link.
Lock the lift limiter in this position.
75 cm
(29
1
/
2
”)
Ground level or the top level of the crops
Rutting of the wheels
Содержание VS 220
Страница 4: ...4 ...
Страница 149: ...Notes 149 Notes ...
Страница 150: ...Notes 150 ...
Страница 154: ...Index 154 W warning stickers place 8 warning triangle 6 Winter storage 123 working method on the headland 112 ...