Kubota 2420 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 69

Kubota 2420 Скачать руководство пользователя страница 2

WARRANTY

Kubota Corporation ("Kubota") warrants that the instrument covered by this warranty shall be

free from defects in material and workmanship under normal use. Kubota will repair or replace,
free of all charges, the instrument which, within one (1) year after delivery or fifteen (15) months
after shipping, whichever comes earlier is proved to the satisfaction of Kubota to have been
defective at the time of delivery, provided that it does not fall under the exceptions and conditions
specified in this warranty. Such exception and conditions include, but are not limited to, failure
due to natural wear and tear, accident, negligence, alteration, repair, or operation in a manner not
prescribed in the Instruction Manual supplied with the instrument. The foregoing expresses
Kubotas sole warranty with respect to the instrument.

THIS WARRANTY IS MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES AND ALL

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED.

Kubota and its authorized dealers will not be liable for any consequential damages, loss or

expense arising from the improper use of the instrument. Kubota will not honor any other
warranty, which may be given, by its representative or dealer or otherwise which is different from
the warranty given hereunder. This warranty is not assignable and is operative only in favor of the
original customer to whom this warranty is originally delivered.

Use of Model 2420

Model 2420 can be used for preprocessing in in-vitro analysis, which breaks down blood or urine
samples containing plasmas or cells. Accordingly, it is not designed to connect directly to a
patient's body.
Do not use the centrifuge for separation of any hazardous material (explosive, chemically active,
organic, or radiation containing material, or material contaminated by pathogenic microorganisms)

or oil.

　　　　　　　　　

Copyright

C

1995 KUBOTA Manufacturing Corporation

«
1
2
3
4
...
»

Содержание 2420






































































Отзывы:

Нет отзывов