KTM 950 ADVENTURE 2003, Руководство пользователя

Страница: 21 / 160

3-11
– Fit the upper battery cover and place a battery with battery cover into
the battery compartment.
– Fit the front battery compartment lid and connect both battery cables
1
together to the connections on the front lid (start with the positive
cable).
– Close the front battery compartment lid.
– Mount the underride protection, apply Loctite 243 to the 4 bolts
2
(M8x14 collar bolts) and tighten to 25 Nm.
– Mount the front cover, apply Loctite 243 to both bolts
3
(M8x16)
and tighten to 25 Nm.
– Mount the lower tank compartment and screw on the fuse box
4
.
Mount the fuse box cover.
– Fill cooling liquid into the radiator, compensating tank and engine:
see page 12-16.
– Add engine oil: see page 12-5.
– Connect the fuel sender to the right tank. Connect the gasoline and
vent hoses and mount the tanks.
– Screw in the upper
5
(M8x40) and lower
6
(M8x55) or
7
(M8x50)
fixing bolts and open the fuel cocks.
– Connect the front turn signal and attach the vent hoses to the tanks.
Fasten both side covers with the bolts
8
and tighten.
– Mount the upper tank compartment and fasten with the bolts
9
.
– Close the tank compartment lid and mount the seat.
– Remove the center stand lock
bk
600.29.055.000, remount the left
bump rubber and remove the center stand
bl
.
– Check all hose connections for leakage before you take a trial run.
– Check all hoses, lines and cables for a proper fit.
2
2
3
5
5
4 4
4
4
6
1
1
7
8
8
8
9
9
10
11