KTM 950 ADVENTURE 2003, Руководство пользователя

Страница: 16 / 160

3-6
Repair manual KTM LC8
Art.-Nr
. 3.206.009-E
– Use the trolley jack to position the attachment 600.29.055.100 on
the engine, insert the bolt
1
through the front of the engine bracket
and fasten with the nut. Screw one of the bolts
2
on the rear of the
side stand fixture and slightly lift the engine.
– Remove the bolt
3
and tilt the foot brake pedal to the side.
– Unscrew the ground wire connection
4
.
– Detach the connector from the pulse generator
5
.
– Detach the connector from the oil pressure switch
6
, the
temperature sensor
7
and from the front
8
and rear ignition coil.
Remove any cable clips necessary.
– Pull the bolt
9
out of the lower support (if necessary, raise or lower
the engine slightly).
– Loosen the nut on the swing arm pivot
bk
and knock out the swing
arm pivot with a suitable pipe.
– Pull the engine towards the front with the trolley jack, lower and pull
away towards the side.
– Disconnect all hoses and lines from the engine.
1
2
3
4
5
6
7
8
9
10