©Termo-tehnika, d.o.o.
ID.: 17-16-24-3006-03 | 12.2016
27
4.3.8 Condensate drainage
The device has multiple openings for condensate drainage on the bottom side of the condensation
vessel. It accumulates on the evaporator from the air or is a consequence of evaporator defrosting. In
case a sink will be installed without a drainage pipe, leave all openings for condensate drainage open.
In case a PVC drainage pipe is installed on the sink, use plugs (1) and plug 4 holes; attach the fitting
for the drainage pipe for condensate on the remaining one (2). The pipe for condensate drainage must
be installed lower than the hardware connections of the utility room and device. It can also be routed to
the rain water sink; in this case freezing of the pipe must be prevented.
Plug the holes on the lower part of the condensation vessel with accompanying plugs (1). Attach the
fitting for attaching the condenser’s drainage pipes (2) to one of them.
1
2
You can also install a pipe for condensate drainage which has to be lower than the hardware connection
of the utility room and device. It can also be routed to the rain water sink; in this case freezing of the
pipe must be prevented. In case a condensate pipe is not installed, leave open the openings on the
bottom of the device (chapter 4.3.8).
WARNING
If the condensate drainage is fed to faecal sewage, a suitable syphon must be installed on
the drainage pipe. Otherwise, the presence of ammonia can lead to corrosion of vital parts
of the device and malfunction of the device.
