©Termo-tehnika, d.o.o.
8
ID.: 17-16-24-3006-03 | 12.2016
CAUTION
In three-phase versions of the device it is necessary to ensure the correct
arrangement of phases when connecting it to the power supply.
CAUTION
For the correct operation of the device, the electrical distributor has to
provide electricity of adequate quality (SIST EN 50160). In normal
conditions this is within ± 10 % of the rated voltage. The data about the state
of the electrical grid have to be acquired from the electrical distributor.
CAUTION
Connecting the device to the electrical network has to be performed in
accordance with the standards for connecting devices to the electrical
network. Connect the device to the electrical network via the power supply
cut-off which is installed into the electrical installation under the regulations
in force.
