©Termo-tehnika, d.o.o.
22
ID.: 17-16-24-3006-03 | 12.2016
STEP 2: Removal of chips
Remove all chips from the part where the pipe was cut.
Hold the pipe downwards during cleaning so that the chips do not fall into the pipe.
1
Copper pipe
3
Beveler
2
Copper pipe held downwards
STEP 3: Inserting the screw nut
Removing the screw nut from the exterior unit.
Inserting the screw nut into the pipe which has been cleaned.
1
Copper pipe
2
Screw nut
STEP 4: Edging
The edging has to be performed with tools for edging as shown:
1
Holder
4
Cone
2
Copper pipe
5
Bracket
3
Fitting
6
Handle
7
Holder
Mount the copper pipe firmly into the tool for edging. Consider the dimensions listed in the table
below.
External diameter
‘'A''
[mm]
[inch]
[mm]
9.52
3/8
1.5 ~ 1.7
15.88
5/8
1.6 ~ 1.8
