©Termo-tehnika, d.o.o.
30
ID.: 17-16-24-3006-03 | 12.2016
Connecting clips of the supply cable WPLV-14-S1 NT
The device is powered by the supply cable 3N ~400 V / 50 Hz and is connected to connecting clips R,
S, T (3 x black or black, grey, brown wire) / N / PE ( ). The dimensions of the power cables are listed
in the technical information (chapter 7.2).
The clips R, S, T (brown, black, grey) / clip N (blue) / clip PE ( ) (yellow-green)
For connecting the connecting clips of the device, use cable eyelets or cable lugs.
1
Round connecting fitting
2
Power strip
In case of using a stiff cable or cable eyelets, follow the following instructions:
The use of cables of different sizes is not allowed in making connections (slackness can occur
which can lead to extreme overheating).
More cables of the same thickness must be connected as shown on the picture below.
