Krone Comprima F 155 XC, Оригинальная инструкция по эксплуатации, Страница: 89 / 278

Operation 8
Net wrapping 8.15
Comprima F 155 XC
Original Operating Instructions 150001050_01_en 89
8.15.2 Insert net
WARNING
Risk of injury due to sharp blades at the cutting unit of the tying unit
You may injure your fingers and hands when inserting the wrapping and tying material or
working in the range of the cutting unit of the tying unit.
„ Always wear protective gloves when inserting the wrapping and tying material and when
working in the range of the cutting unit.
„
When working in the range of the cutting unit, work particularly carefully and prudently.
2 1 4 3
6
7
8
9
5
X
RPG000-018
ü
The machine is shut down and safeguarded, refer to page 27 .
ü You have swung the roll holder forward.
„
Unwind a section of the net (7) from the net roll (1) and guide it over the deflection shaft (2)
and under the deflection roll on the cross tube (8).
„ Place the net (7) over the spreading bracket (3).
„
Place the net (7) under the deflection roll (4) on the retaining sheet (6).
„ Guide the net (7) under the synthetic cloth (5). Ensure that the net projects X=170–200 mm
over the edge of the retaining sheet (6).
„
Spread the net (7) to a width of approx. 500 mm so that the drivers of the feed roller can
pick the net up over its full width.
If the net tension is insufficient and the net is not pulled far enough to the outside of the round
bale:
„
Place the net (7) under the deflection tube on the cross tube (9).
To set the feed, cutting and tying position, refer to page 159 .
To set the number of net layers, refer to page 140 .