Maintenance
18
Checking and setting the axial play of the brake disc at the wrapping material brake 18.24
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
215
Setting the electronics
4
6
1
3
2
5
2
3
4
5
6
7
8
10
9
4
7
8
RP000-553
If the filling in the KRONE Alpha operation unit (8) is no longer displayed correctly on the
warning lights (7) the baling pressure indicators (1) must be set as follows.
Lift the baling pressure indicators (1) up to the red label (2) and hold in this position.
To move the holder (6) with the sensors (5) in the direction of the arrow, undo the wing
screw (3) in the storage compartment.
Move the holder (6) with the sensors (5) in the direction of the arrow until the warning
lights (7) on the KRONE Alpha operation unit (8) light up.
Mount a screw in the recess at this position (4) so that the holder (6) with the sensors (5)
cannot be swivelled deeper.
18.24
Checking and setting the axial play of the brake disc at the wrapping
material brake
4
5
2
3
1
3
6
X
4
RP000-023
The axial play of the brake disc (4) on the wrapping material brake must be adjusted, etc.,
before setting the sensor B02 "Tying process active ",
.