8
Operation
8.15
Net wrapping
88
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
8
9
10
11
1
6
4
7
3
5
2
2
RPG000-016
ü
The machine is shut down and safeguarded,
.
Raise the lever (4).
Swivel the roll holder (6) and brake disc (1) forwards.
Remove the brake disc (1).
Take a new net roll out of the package. Ensure that the beginning of the net roll faces
towards the machine and can be pulled out from above.
Push the net roll (9) onto the roll holder (6) and push on the support (7).
Push the brake disc (1) with the sleeve clamps (2) anti-clockwise all the way into the
sleeve (10) of the net roll (9).
ð
The net roll (9) is permanently locked in the roll holder (6).
Swivel the roll holder (6) back into the machine and lift it into the lock using the lever (4).
Actuate the wrapping material brake lever (3) so that the roll holder (6) engages with the
wrapping material brake.
When swivelling in the roll holder, ensure that the tension lever (5) is under the net roll (9).
Check that the net roll (9) is aligned centrally. To do this, measure the distances to the left
and right side walls.
RPG000-017
If the net roll (9) has still not been centrally aligned:
Loosen both adjusting rings (8, 11).
Use a mounting lever (12) to push the net roll (9) in the required direction of the arrow until
the net roll (9) is positioned in the centre.
Push both adjusting rings (8, 11) each with a distance of 2-3 mm onto the sleeve (10) and fix
them in this position.