Krone Comprima F 155 XC, Оригинальная инструкция по эксплуатации, Страница: 72 / 278

8 Operation
8.3 Improving bale chamber filling
72
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
The driver guide rails (1) on the starter roller must be mounted inside the bale chamber.
The driver guide rails (1) can be ordered by quoting the following order numbers:
KRONE component Order number
Driver guide rails 20 461 612 *
Fixing material 00 904 025 *
ü The tailgate is opened and secured, refer to page 75 .
ü
The machine is shut down and safeguarded, refer to page 27 .
„
Mount the 6 driver guide rails (1) on the starter roller (2).
8.3.3 Mounting additional deflector sheets in the tailgate
1
2 3
RPG000-060
If the finished round bales do not fall out of the bale chamber, 2 deflector sheets (1) can be
mounted on the right and left in the machine tailgate.
The deflector sheets (1) can be ordered by quoting the following order number:
KRONE component Order number
Deflector sheets 2x 00 275 479 *
ü The tailgate is opened and secured, refer to page 75 .
ü
The machine is shut down and safeguarded, refer to page 27 .
„ Mount the deflector sheets (1) on the insides of the bale chamber by screwing the screw
connections (2) into the available boreholes.
If the finished round bales are still not falling out of the bale chamber following installation of the
deflector sheets (1):
„ Remove the slide sheets (3) from the right and left sides of the machine housing.