Krone Comprima F 155 XC Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 278

Krone Comprima F 155 XC Скачать руководство пользователя страница 29

Safety

2

Safety labels on the machine

2.6

Comprima F 155 XC

Original Operating Instructions 150001050_01_en

29

Ensure that there is nobody in the danger zone of the actuated moving machine parts.

Switch on the ignition.

The actuator test must only be performed from a safe position outside the area that is
affected by machine parts moved by the actuators.

2.6

Safety labels on the machine

Every safety label is provided with an order number and can be ordered directly from the
authorised KRONE dealer. Immediately replace missing, damaged and unrecognisable safety
labels.

When attaching safety labels, the contact surface on the machine must be clean and free of dirt,
oil and grease to ensure optimum adhesion of the labels.

«
...
27
28
29
30
31
...
»

Содержание Comprima F 155 XC























































































































































































































































































Отзывы:

Нет отзывов