Krone Big Pack 127 / MultiCut, Руководство по эксплуатации, Страница: 77 / 132

VII - 7
Care and Maintenance
7.8 Compressed Air Unit
7.8.1 General
Before draining condensed water from the compressed air reservoir tank, make sure that the
machine is secured from rolling away. Apply the parking brake and place wheel chocks under
the wheels.
Big pack balers equipped with an air brake have two
compressed air reservoir tanks and pneumatic brake
cylinders. For hydraulically actuated brakes, only one
compressed air reservoir tank is fitted for the knotter
cleaning mechanism. Condensed water collects in the
compressed air reservoir tanks. This condensation can
lead to malfunctions. It must therefore be drained every
week.
7.8.2 Compressed Air Reservoir Tank
On big pack balers with air brakes, the compressed air
reservoir tank (2) is located on the left hand side of the
machine. It is connected to the compressed air reser-
voir tank for the knotter cleaning mechanism by a pres-
sure line (1). Condensed water can be drained at the
water evacuation valve (3).
The compressed air reservoir tank for the knotter me-
chanism is located on the left hand side of the machine
at the top beside the bale channel. Condensed water
must also be drained here at the water evacuation
valve.
Oil check
Check the oil level in the angular gearbox (1) before
each operation.
To do this remove the check screw (2). The oil level
must reach the lower edge of the check hole, if
necessary top up the oil through the breather hole (3).
The oil should be changed after every season.
To change the oil, remove the breather screw (3) the
discharging screw (4) and the check screw (2). Collect
the draining oil in a suitable container and dispose of it
in an environmentally friendly manner. Fit the
discharging screw (4) and fill in oil up to the check hole.
Fit the check screw (2) and breather screw (3).
Oil change
BP380-7-083
1
3
4
2
BP380-7-084
3
2
1