Krone Big Pack 127 / MultiCut, Руководство по эксплуатации, Страница: 11 / 132

II - 1
Safety
2 Safety
2.1 Identifying Safety Instructions
in the Operating Manual
The safety instructions contained in this manual, which
could result in personal injury if not followed, are
identified by the general danger sign:
safety sign in accordance with DIN 4844 - W9
General function instructions are indicated as follows:
2.2 Safety Instructions and
Accident Prevention
Regulations
2.2.1 Personnel Qualification and
Training
The big baler must only be used, maintained and
repaired by personnel who are acquainted with the
machine and have been informed of the dangers
involved. The operator must precisely define the areas
of responsibility and competence and monitor the
personnel. Should personnel lack the required know-
ledge they must receive the required training and
instruction. The operator must also ensure that the
contents of this operating manual have been fully
understood by the personnel.
Repair work not described in this operating manual
should be completed by authorized service centers
only.
2.2.2 Failure to Follow the Safety
Instructions
Failure to follow the safety instructions could result in
personal injury and environmental hazards as well as
damage to the machine. Failure to follow the safety
instructions could result in the forfeiture of any claims
for damages.
Failure to follow the safety instructions could, for
example , result in the following hazards:
– risk to persons by failure to secure the working
area
– breakdown of important machine functions
– failure of prescribed methods for repair and
maintenance
– risk to persons due to mechanical and chemical
effects
– damage to the environment due to leaking
hydraulic oil
2.2.3 Working in a Safety Conscious
Manner
Follow the safety instructions included in this operating
manual, existing accident prevention rules and any
internal work, operating and safety rules set out by the
operator.
The safety and accident prevention regulations of the
responsible professional associations are binding.
Observe the safety instructions provided by the vehicle
manufacturer.
Instructions which are attached to the machine need to
be followed and kept fully legible.