Krone Big Pack 127 / MultiCut, Руководство по эксплуатации, Страница: 34 / 132

III - 12
Preparing the Big Pack Baler
Jack Stand and PTO Shaft for Top Attachment
The wheel chocks (1) are located on the rear left and
right hand sides beside the bale channel. Place the
wheel chocks in front of and behind the wheels. The
machine is thereby secured from rolling away.
Gently wind down the raised jack stand (4) using crank
(1). Pull out the bolt (2) and extend the lower part of the
jack stand. Secure with the bolt. Increase the area of
the pad on the support foot (3) where the ground is soft
and place a wooden plank underneath.
1
BP380-7-028
BP380-7-029
2
3
5
4
1
6
Top Attachment
Remove the PTO shaft (5) and rest in the retaining
chain (6).
Bottom Attachment
Die Stütze (1) hochklappen, remove the PTO shaft und
auf die Stütze (1) ablegen.
BP-VFS-013
1