Krone Big Pack 127 / MultiCut, Руководство по эксплуатации, Страница: 41 / 132

IV - 5
Comfort Controls
The maximum possible baling flap cylinder pressure is
pre-selected for the crop to be baled with buttons
5
,
6
and
7
.
Damp crop , e.g. silage.
Max. pressure in the brake flap cylinders
approx. 60 bar.
Mediumdamp crop, e.g. hay.
Max. pressure in the brake flap cylinders
approx. 110 bar.
Dry crop, e.g. straw.
Max. pressure in the brake flap cylinders
approx. 180 bar.
The pressures set using the buttons
5
,
6
and
7
are displayed on the pressure gauge on the
front when the big pack baler is idle. During operation
the baling pressure of the brake flaps is set
automatically by the comfort control. The pressure can
vary greatly.
When baling, make sure that the bar chart for the density force (b) and (c) is at the level of
the set density (a). If this is not the case the density force setting must be corrected using
buttons
1
or
2
or (
5
,
6
and
7
).
During the baling process the density force is moni-
tored, amplified and fed to the on-board computer by
two sensors auf dem vorderen Rahmenteil. The on-
board computer evaluates these signals and regulates
the hydraulic cylinder pressure in the bale channel
flaps. The signals are transmitted to the control box at
the same time. Here the bar charts (b) and (c) appear,
in various sizes according to the measured values, in
the display field beside the digital display (a) for the left
and right hand sides of the bale chamber.
4.6.1 Adjusting the density force
A bar chart display (a) appears just after the control
box is switched on showing the set pack density. When
the big pack baler is put into operation displays (b) and
(c) appear in the display field showing the current den-
sity distribution on the right and left hand sides of the
pack. The set density is pre-selected with buttons
1
and
2
. The higher the set density, the lon-
ger the bars (a).
4.6 Basic setting
5
6
7
Prog
Quit
#
1 2 9 0
3 4
BP-VFS-073
c
b a
90 90
5 6 8 7
P
max
d
Prog
Quit
#
1 2 5 6 7 8 9 0
3 4
BP 380-7-147
7 6 5
Prog Quit
#
1 2 5 6 7 8 9 0
3 4
BP 380-7-148
c
b a