Krone Big Pack 127 / MultiCut, Руководство по эксплуатации, Страница: 76 / 132

VII - 6
Care and Maintenance
7.7.5 Pick Up Gearbox
The upper and lower pick up gearboxes (3) are located
on the right hand side of the machine.
Checking the Oil
Check the oil level in the upper pick up gearboxes (3)
every time before using the machine.
To do this unscrew the oil check screw (1). The oil
must come up to the oil check hole. Top up with oil
if necessary. Screw the check screw in again after
checking the level.
Changing the Oil
Change the oil after every season. To do this unscrew
and remove the check screw (1) on the upper gearbox
and the ventilation screw (4) and the drain screw (2)
from the gearbox. Collect oil discharged in a suitable
collection container. Screw the drain screw in again.
Screw in the check and air evacuation screws again.
Oil check
Check the oil level in the angular gearbox (1) before
each operation.
To do this remove the check screw (2). The oil level
must reach the lower edge of the check hole, if
necessary top up the oil.
Oil change
The oil should be changed after every season.
To change the oil, remove the discharging screw (3)
and the check screw (2). Collect the draining oil in a
suitable container and dispose of it in an
environmentally friendly manner. Fit the discharging
screw (3) and fill in oil up to the check hole. Fit the
check screw (2).
7.7.6 Cutting system gearbox for Big Pack MultiCut
On the right-hand side of the machine there is an
angular gearbox at the top and a pick-up/cutting system
transfer gearbox at the bottom.
BP380-7-081
4
2
3
3
4
1
2
BP380-7-082
1
2
3