Krone Big Pack 127 / MultiCut, Руководство по эксплуатации, Страница: 42 / 132

IV - 6
Comfort Controls
Correction measures for deviations
1.) The LED (d) on button (7) comes on. Displays (b)
and (c) (current density) are significantly smaller
than the nominal density (a).
The prescribed nominal density (a) can not be
attained at the oil pressure and the previous
conditions (baling material parameters and
throughput) given by the on-board hydraulics.
Remedy
Reduce the nominal density (a) on button
1
to
the level of the measured current density (b, c). The
load is removed from the on-board machine
hydraulics.
2.) Indicator light (5) or (6) come on. Displays (b) and
(c) (current density) are considerably less than the
nominal density (a).
The big pack baler is operated with a pre-set
maximum pressure (pressure gauge shows approx.
60 bar when the indicator light (5) is on and approx.
110 bar when the indicator light (6) is on). Die
Sollpresskraft ist zu hoch gewählt und mit diesem
Höchstdruck nicht erreichbar.
Remedy
Reduce the nominal density (a) on button
1
to
the level of the measured current density (b, c). The
load is removed from the on-board machine
hydraulics.
3.) Indicator light (5) or (6) come on. Displays (b) and
(c) (current density) are considerably less than the
nominal density (a).
Remedy
Increase the preselected maximum baling pressure.
Switch from button
5
to button
6
or from
button
6
to button
7
. Adjust the nominal
density (a) according to the desired pack density
using button
1
or
2
.
Prog Quit
#
1 2 9 0
3 4
BP-VFS-074
b
c
a
90 90
5 6 8 7
P
max
7
90 90
5 6 8 7
P
max
Prog Quit
#
1 2 9 0
3 4
BP-VFS-076
5
c
b a
6
90 90
5 6 8 7
P
max
Prog Quit
#
1 2 9 0
3 4
BP-VFS-076
5
c
b a
6