92
K-CONFIG - Defining the Control Room via the Project Navigator
6.4.5.1 Save a Virtual Keypad Device Template
To add a virtual keypad device as a template, right-click the virtual device and click Save as Template:
Figure 167: Virtual Keypad Device Shortcuts – Saving as a Template
The following message appears:
Figure 168: Virtual Device Shortcuts – Saved as a Template
The template is added to the virtual devices templates list (for use when adding a virtual device template).
Figure 169: Virtual Device Shortcuts – New Template Added
6.4.5.2 Setting a Virtual Device to be the Same As Another Virtual Device
When more than one virtual device is defined in a controlled room, you can set one or more of them to be the exact
same as one of the other virtual keypad devices:
Figure 170: Virtua Device Shortcuts – Setting the Same As
