![background image](http://html.mh-extra.com/html/kramer/k-config/k-config_user-manual_2002034035.webp)
28
K-CONFIG - Getting to Know K-CONFIG
2.
Click
OK
.
The following window appears:
Figure 35: Export Device xml File
You can also export a virtual device by right clicking it and selecting Export Device XML:
Figure 36: Export Device xml
4.2.2
The Device Menu
This section defines the
Device
menu.
Figure 37: The Device Menu
Menu Command
Function
Connect/ Disconnect
Click to connect to a device via an IP address, a
USB connector or a serial port (see
) or
disconnect a connected device
Discover
Discover devices in the local IP network
Firmware Upgrade
Load the firmware upgrade file to the device for
upgrading the device (see Section 10.3).
Sync Configuration to
Device
Writes the project configuration file to the device
(active only when the device is connected), see
Section 10.7
Read Configuration
from Device
Reads the project configuration file (*.kpr) from the
device (active only when the device is connected
via Ethernet), see
Section 10.7.1
Clear Configuration
from Device
Removes the project configuration file from the
device, see
Section 10.9