![background image](http://html.mh-extra.com/html/kramer/k-config/k-config_user-manual_2002034111.webp)
104
K-CONFIG - Assigning the Controlled Devices to Master and Auxiliary Device Ports
Setting the Digital Output
Define the GPI/O in the
Port Manager
:
Once defined as Digital Output, the GPI/O port will appear in the Action Editor > Port Switch:
Figure 193: The GPI/O Defined as Digital Output Mode
7.2.3
Analog Input
The analog input mode accepts an analog external device, such as, a volume control device:
The Pullup and Threshold features are disabled.
The trigger is activated once when the voltage is within the specified voltage range.
7.3
Assigning a Controlled Device Driver to an Ethernet Port
The Ethernet ports let you send control commands via the Ethernet port to up to 15 IP addresses located on the same
subnet and associated with IP controlled devices.
To define an Ethernet port, do the following:
1.
Set the
Ethernet
port
Driver
and
Description
.
2.
Click the
Properties
field to define the
Ethernet Settings
:
Figure 194: Ethernet Settings Example