K-CONFIG –
Defining the Control Room via the Project Navigator
77
To set the ports
:
1.
Select an Ethernet port (Ethernet 11, for example) and click Select proxy (gateway) in the Driver column of the
port manager window.
You can also select an Ethernet port by checking the
Show unused buttons
box and then right-clicking that
port in the Project Navigator window:
Figure 129: Control Gateway Device – Proxy (Gateway) Port
The following window appears:
Figure 130: Control Gateway Device – Proxy (Gateway) Ports List
2.
Select a port (you can select one or more ports, see
Section 6.3.1
), for example IR.Out_2:
Figure 131: Control Gateway Device – Select a Port
Note that if a port has already been assigned with a driver (
VP-444
is assigned to IR OUT 1 in the example
above), that port will display the driver name and you can also choose it as a gateway port).
