![background image](http://html.mh-extra.com/html/kramer/k-config/k-config_user-manual_2002034086.webp)
K-CONFIG –
Defining the Control Room via the Project Navigator
79
6.
Copy the Ethernet settings:
Figure 135: Control Gateway Device – IR Port Ethernet Settings
7.
Click OK.
The IR.Out_1 port is now assigned to Ethernet.11:
Figure 136: Control Gateway Device – Port Manager, assigning an Ethernet Port
In the same way you can assign all the IR Out ports each to an Ethernet port:
Figure 137: Control Gateway Device – Assigning all the IR ports