K-CONFIG –
Using the Triggers
127
4.
Select the query results which will trigger an action list:
Figure 244: Query Events – Select the Query Results
5.
Click
OK
to create the Query trigger.
Selecting On means that after the power is on the query event will be triggered.
By default queries are disabled (upon device startup). A query will be triggered only if the matching "Query start" action was
executed from the Query Start/Stop action (see
Section 9.9
) or another trigger. (For example, a "Device startup" trigger or a
button trigger). You can also stop a query from triggering by executing the "Query stop" action.
Figure 245: Query Events – The Power-On Trigger
6.
Create the action list for this trigger.
After adding commands to the list, the query trigger appears
bold
.
