![background image](http://html.mh-extra.com/html/kramer/k-config/k-config_user-manual_2002034142.webp)
K-CONFIG –
Adding Actions to a Trigger
135
9.2.1
Adding a Table Action
After creating tables via the Driver Manager (see
Section 5.5.4
) you can use it in the action editor Port Command list:
Figure 258: The Table Port Command
Select the:
•
Table (Output_Volume).
•
Select the room controller device whose LEDs should behave as defined in the table (
RC-63DL
). Select
None
if
you do not want the LEDs to behave as defined in the commands table.
•
Set the behavior of the table commands to go gradually up, down, or set to a specific value. If you click Set, you
can choose a specific volume level (see
Figure 259: The Table Port Command – Setting a specific Volume Level