K-CONFIG –
The Driver Manager – Getting Started
59
5.
Add the following commands (you can use the copy and paste function between the rows and just change the
specific, relevant byte):
Figure 95: The Driver Manager Window – Writing the Commands
Upon creation, by default, all the rows are checked – meaning that when you move UP/DOWN the list, all the rows will
be used. If you prefer to use less rows in your configuration (for example, you may not need to use all the volume
levels to create a clean volume UP/DN effect) you can now enable or disable specific row commands manually or
through the “Select Every” box, as needed (for example, to set the rate of increase or decrease of the volume) by
selecting which commands should be used when traveling UP/DN in the table with the relevant
K-CONFIG
Action
commands:
6.
For example, select every 3 rows and click Set:
Figure 96: The Driver Manager Window – Selecting every 3 Rows
7.
Check the
Keep current selection
box if required.
