Korg TRITON Le Скачать руководство пользователя

Страница: 251 / 269

244

Medium write protected

Memory full

Memory overflow

Memory protected

Multisample L and R are identical

No data

No medium

No recording track specified

No Sampling Upgrade Installed

No space available on medium

Not enough memory

Not enough memory to load

Not enough memory to open pattern

Meaning: The SmartMedia or other media to which you

attempted to save is write-protected.

Action:

Turn off write protect on the media and execute
the command once again.

Meaning: In Sequencer mode when editing a song, track or

pattern, the total data of all songs has used up all
of the sequence data memory, and further editing
is not possible.

Action:

Delete other song data etc. to increase the amount
of free memory.

Meaning: While realtime recording in Sequencer mode,

there is no more free memory to accommodate the
recorded data, so recording has been forcibly
halted.

Action:

Delete other song data etc. to increase the amount
of free memory.

Meaning: In Media mode when loading a Standard MIDI

File, the sequence memory has filled up.

Action:

Delete song data. (If necessary, save the data
before deleting it.)

Meaning: In Media mode when using “Save Exclusive” to

receive exclusive data, the sequence memory has
filled up.

Action:

If you are receiving two or more sets of exclusive
data, transmit them separately to this instrument.

Meaning: In Media mode, you attempted to load more sam-

ple waveform data than there was free memory
capacity.

Action:

In Sampling mode, execute Delete sample to cre-
ate free space in the sample waveform data area,
and re-load the data.

Meaning: The internal program, combination, song, or

drum kit is protected.

Action:

In Global mode, turn off write-protect, and exe-
cute the write or load operation once again.

Meaning: Since the destination (save location) L and R mul-

tisample numbers are the same, the editing opera-
tion could not be executed.

Action:

Select a different multisample number for the L
and R of the destination (save location).

Meaning: When loading a Standard MIDI File, the file con-

tained no events.

Meaning: When you executed “Export Samples as AIFF/

WAVE” for Samples in One Multisample, there
were no samples.

Action:

Create sample data.

Meaning: When executing a command in Media mode, the

media that was the object of the operation is not
inserted.

Action:

Insert the media.

Meaning: When performing realtime multi-track recording,

you attempted to begin recording with no tracks
set to REC.

Action:

Set the desired tracks for recording to REC.

Meaning: This will be displayed if you press the [SAM-

PLING] key on an TRITON Le in which the EXB-
SMPL option (sold separately) has not been
installed.

Meaning: When you attempted to save a file or create a

director, the media contained no free space.

Action:

Either delete an existing file, or exchange the
media with one that has sufficient free space.

Meaning: When starting realtime recording in Sequencer

mode, the minimum amount of free memory
(such as memory for the BAR events up to the
recording start location) could not be allocated.

Action:

Delete other song data etc. to increase the amount
of free memory.

Meaning: When executing “Save Exclusive” in Media mode,

there was no remaining sequence memory. Alter-
natively, when executing “Load Exclusive,” suffi-
cient free sequence memory could not be
allocated.

Action:

Delete song data. (If necessary, save the data
before deleting it.)

Meaning: When you attempted to load a .SNG file in Media

mode, there was insufficient free memory.

Action:

Delete other song data etc. to increase the amount
of free memory.

Meaning: There was insufficient sequencer memory to open

the pattern, so editing is not possible.

Action:

Either delete unwanted data such as a song, track,
or pattern, or do not open the pattern.

Содержание TRITON Le














































































































































































































































































Результаты поиска

Содержание TRITON Le

Отзывы:

Похожие инструкции для TRITON Le

Бренды по названию

Популярные бренды

Korg TRITON Le, Руководство по параметрам

Результаты поиска

Содержание TRITON Le

Отзывы:

Похожие инструкции для TRITON Le

Бренды по названию

Популярные бренды